In 1962, Buckminster Fuller presented the particularly audacious proposal for the Geoscope. It was a 200-foot diameter geodesic sphere to be suspended over the East River in New York City, in full view of the United Nations. It was a big idea, for sure, and it was one that he felt could truly inform and deeply affect the decision making of this body through animations of global data, trends and other information regarding the globe, on this sphere. And today, 45 years later, we clearly have no less need for this kind of clarity and perspective, but what we do have is improved technology.
1952, presenterade Buckminster Fuller ett särskilt högtravande förslag for Geoskopet. Det var en klotformad sfär med 200 fots diameter som skulle hängas upp över East River i New York, mitt framför Förenta Nationerna. Det var en stor idé, självklart, och det var en idé som han ärligt kände kunde informera och på djupet påverka beslutsorganen i denna organisation, genom animationer av globala data, trender och annan information gällande jorden, på denna sfär. Och idag, 45 år senare, har vi uppenbarligen inget minskat behov av denna klarsynthet och perspektiv, men vad vi har är förbättrad teknik.
Today we don't need one million light bulbs to create a spherical display. We can use LEDs. LEDs are smaller, they're cheaper, they're longer lasting, they're more efficient. Most importantly for this, they're faster. And this speed, combined with today's high-performance micro-controllers, allows us to actually simulate, in this piece, over 17,000 LEDs -- using just 64. And the way this happens is through the phenomenon of persistence of vision. But as this ring rotates at about 1,700 rpm -- that's 28 times per second. The equator's speed is actually about 60 miles per hour. There are four on-board micro-controllers that, each time this ring rotates it, as it passes the rear of the display, it picks up a position signal. And from that, the on-board micro-controllers can extrapolate the position of the ring at all points around the revolution and display arbitrary bitmap images and animations.
Idag behöver vi inte en miljon glödlampor för att skapa en sfärisk display. Vi kan använda lysdioder. Lysdioder är mindre, billigare, varar längre, de är mer effektiva. Och viktigast för detta, de är snabbare. Och denna hastighet, kombinerad med dagens höghastighets mikrochip tillåter oss att faktiskt simulera, i denna delen, över 17,000 lysdioder -- bara genom att använda 64. Och detta händer genom fenomenet av bestående vision. Men då denna ringen roterar omkring 1,700 varv/min -- det är 28 gånger per sekund, Ekvatorns hastighet är faktiskt omkring 90 km/h. Det finns fyra mikrokontroller ombord som, varje gång ringen roterar kommer, när den passerar baksidan av displayen att plocka upp en positionssignal och därifrån, kommer mikrokontrollerna att beräkna ringens position vid alla punkter under rotationen och visa godtyckliga bitmapbilder och animeringar.
But this is really just the beginning. In addition to higher resolution versions of this display, my father and I are working on a new patent-pending design for a fully volumetric display using the same phenomenon. It achieves this by rotating LEDs about two axes. So as you can see here, this is a, eleven-inch diameter circuit board. These blocks represent LEDs. And so you could see that as this disc rotates about this axis, it will create a disc of light that we can control. That's nothing new: that's a propeller clock; that's the rims that you can buy for your car. But what is new is that, when we rotate this disc about this axis, this disc of light actually becomes a sphere of light. And so we can control that with micro-controllers and create a fully volumetric, three-dimensional display with just 256 LEDs.
men detta är bara början. Förutom en version med högre upplösning, jobbar min far och jag på en ny patentsökt design för en display i full volym som använder samma fenomen. Den åstadkommer detta genom att rotera lysdioder kring två axlar. Som ni kan se här, detta är ett 30 cm i diameter kretskort. Dessa block representerar lysdioder. Som ni kan se när disken roterar kring denna axeln kommer det att skapa en skiva av ljus som vi kan kontrollera. Det är ingenting nytt, det är en propellerklocka. Det är fälgarna som du kan köpa till din bil. Men vad som är nytt, är att när vi roterar disken runt denna axeln, nu blir denna ljusskivan faktiskt en sfär av ljus. Och vi kan kontrollera detta med mikrokontroller och skapa i full volym, en tredimensionel display med endast 256 lysdioder.
Now this piece is currently in process -- due out in May -- but what we've done is we've put together a small demo, just to show the geometric translation of points into a sphere. I've got a little video to show you, but keep in mind that this is with no electronic control, and this is also with only four LEDs. This is actually only about 1.5 percent of what the final display will be in May. So, take a look. And here you can see it's rotating about the vertical axis only, creating circles. And then, as the other axis kicks in, those actually blur into a volume. And the shutter speed of the camera actually makes it slightly less effective in this case.
Denna biten är nuvarande under utveckling -- fram till i Maj, med vad vi har gjort är att sätta ihop en liten demonstration, bara för att visa den geometriska översättningen av punkter till en sfär. Jag har en liten video att visa er, men kom ihåg att detta är utan elektronisk kontroll, och det är även med endast fyra lysdioder. Det är faktiskt endaskt omkring 1.5 procent av den slutliga displayen i Maj. Här, ta en titt. Här kan ni se att den endast roterar kring den vertikala axeln, och skapar cirklar. Och sedan, när den andra axeln börjar, blandas dessa till en volym. Och bländaren på kameran gör detta faktiskt mindre effektivt i detta fallet.
But this piece is due out in May. It'll be on display at the Interactive Telecommunications Spring Show in Greenwich Village in New York City -- that's open to the public, definitely invite you all to come and attend -- it's a fantastic show. There are hundreds of student innovators with fantastic projects. This piece, actually, will be on display down in the Sierra Simulcast Lounge in the breaks between now and the end of the show. So I'd love to talk to you all, and invite you to come down and take a closer look. It's an honor to be here. Thanks very much.
Men denna kommer ut i Maj. Den kommer finnas på utställning hos Interactiv Telecommunications vårutställning i Greenwich Village i New York -- den är öppen för allmänheten, Jag bjuder verkligen in er att komma -- det är en fantastisk show. Det finns hundratals studentuppfinnare med fantastiska projekt. Denna, kommer faktiskt att vara utställd nere i Sierra Simulcast paviljongen under rasterna mellan nu och slutet på showen. Jag skulle gilla att prata med er alla, och bjuda in er att komma och ta en närmare titt. Det är en ära att vara här, tack så mycket.
(Applause)
(Applåder)