In 1962, Buckminster Fuller presented the particularly audacious proposal for the Geoscope. It was a 200-foot diameter geodesic sphere to be suspended over the East River in New York City, in full view of the United Nations. It was a big idea, for sure, and it was one that he felt could truly inform and deeply affect the decision making of this body through animations of global data, trends and other information regarding the globe, on this sphere. And today, 45 years later, we clearly have no less need for this kind of clarity and perspective, but what we do have is improved technology.
În 1952, Buckminster Fuller a prezentat o propunere îndrăzneaţă a Geoscopului. Era o sferă geodezică cu diametrul de 61 de metri care urma să fie suspendată deasupra East River în New York City, pentru a fi vizibilă din clădirea Naţiunilor Unite. Era o idee măreaţă şi el credea că putea să informeze şi să afecteze profund procesul decizional al acestei organizaţii prin afişarea de date globale, trenduri şi alte informaţii privind globul, pe aceasta sferă. Iar astăzi, 45 de ani mai târziu, în mod clar nu ni s-a diminuat nevoia pentru claritate şi perspectivă,
Today we don't need one million light bulbs to create a spherical display. We can use LEDs. LEDs are smaller, they're cheaper, they're longer lasting, they're more efficient. Most importantly for this, they're faster. And this speed, combined with today's high-performance micro-controllers, allows us to actually simulate, in this piece, over 17,000 LEDs -- using just 64. And the way this happens is through the phenomenon of persistence of vision. But as this ring rotates at about 1,700 rpm -- that's 28 times per second. The equator's speed is actually about 60 miles per hour. There are four on-board micro-controllers that, each time this ring rotates it, as it passes the rear of the display, it picks up a position signal. And from that, the on-board micro-controllers can extrapolate the position of the ring at all points around the revolution and display arbitrary bitmap images and animations.
dar ceea ce avem e o tehnologie îmbunătăţită. Astăzi nu avem nevoie de un milion de becuri pentru a crea un display sferic. Putem folosi LED-uri. LED-urile sunt mai mici, mai ieftine, durează mai mult şi sunt mai eficiente. Cel mai important aspect e că sunt mai rapide. Iar viteza împreună cu micro-controlerele de mare performanţă din ziua de azi ne-au permis să simulam, în acest dispozitiv, peste 17.000 LED-uri, utilizând doar 64. Acest lucru are loc prin fenomenul de persistenţă a vederii. Acest inel se roteşte de 1.700 pe minut, înseamnă de 28 de ori pe secundă. Viteza ecuatorului e de 100 de kilometri pe oră. Sunt patru micro-controlere integrate care la fiecare rotație a inelului în timp ce trece prin spatele display-ului, receptionează semnalul de poziţie şi de aici micro-controlerele integrate pot determina poziţia inelului tot timpul şi pot forma imagini şi animaţii bitmap.
But this is really just the beginning. In addition to higher resolution versions of this display, my father and I are working on a new patent-pending design for a fully volumetric display using the same phenomenon. It achieves this by rotating LEDs about two axes. So as you can see here, this is a, eleven-inch diameter circuit board. These blocks represent LEDs. And so you could see that as this disc rotates about this axis, it will create a disc of light that we can control. That's nothing new: that's a propeller clock; that's the rims that you can buy for your car. But what is new is that, when we rotate this disc about this axis, this disc of light actually becomes a sphere of light. And so we can control that with micro-controllers and create a fully volumetric, three-dimensional display with just 256 LEDs.
Dar ăsta e numai începutul. În plus faţă de versiunile cu rezoluție mai mare ale acestui display, eu și tatăl meu lucrăm la un nou design, ce urmează să fie patentat, pentru un nou display complet utilizând acelaşi fenomen. Reuşeste acest lucru rotind LED-urile în două axe. După cum puteţi vedea, e o placă de circuit cu diametrul de 28 centimetri. Acesta reprezintă LED-urile. Astfel aţi putea vedea că în timp ce acest disc se roteşte pe această axă, el va crea un disc de lumină pe care îl putem controla. Asta nu e nimic nou, e un ceas rotitor, jantele pe care le cumperi pentru mașină. Dar noutatea e că, atunci când rotim acest disc pe această axă, acest disc de lumină devine o sferă de lumină. Putem controla asta cu micro-controlerele pentru a creea un display complet tridimensional cu doar 256 de LED-uri.
Now this piece is currently in process -- due out in May -- but what we've done is we've put together a small demo, just to show the geometric translation of points into a sphere. I've got a little video to show you, but keep in mind that this is with no electronic control, and this is also with only four LEDs. This is actually only about 1.5 percent of what the final display will be in May. So, take a look. And here you can see it's rotating about the vertical axis only, creating circles. And then, as the other axis kicks in, those actually blur into a volume. And the shutter speed of the camera actually makes it slightly less effective in this case.
Acum acest dispozitiv e în dezvoltare, urmând să fie finalizat în mai, dar am construim un mic demo, doar pentru a arăta translaţia geometrică a punctelor într-o sferă. Am un filmuleţ să vă arăt, dar ţineţi minte că acesta nu are control electronic, şi are doar patru LED-uri. E de fapt doar 1,5% din display-ul final din mai. Aşadar, priviţi. Şi aici puteţi vedea că se roteşte doar pe axa verticală, creând cercuri. Apoi, când cealaltă axa intră în funcţiune, acestea se transformă într-un volum. Iar frecvența camerei îl face mai puţin eficient în acest caz.
But this piece is due out in May. It'll be on display at the Interactive Telecommunications Spring Show in Greenwich Village in New York City -- that's open to the public, definitely invite you all to come and attend -- it's a fantastic show. There are hundreds of student innovators with fantastic projects. This piece, actually, will be on display down in the Sierra Simulcast Lounge in the breaks between now and the end of the show. So I'd love to talk to you all, and invite you to come down and take a closer look. It's an honor to be here. Thanks very much.
Dar acest dispozitiv urmează să fie finalizat în mai. Va fi afişat la Interactive Telecomunication Spring Show în Greenwich Village în New York City, care e deschis publicului, şi categoric vă invit pe toţi, e un spectacol fantastic. Sunt sute de studenţi inovatori cu proiecte fantastice. Acest dispozitiv va fi prezentat în Sierra Simulcast Lounge în pauzele de acum şi până la sfârşitul conferinței. Mi-ar face plăcere să vorbim şi vă invit să priviţi de aproape dispozitivul. A fost o onoare, vă mulţumesc foarte mult!
(Applause)