In 1962, Buckminster Fuller presented the particularly audacious proposal for the Geoscope. It was a 200-foot diameter geodesic sphere to be suspended over the East River in New York City, in full view of the United Nations. It was a big idea, for sure, and it was one that he felt could truly inform and deeply affect the decision making of this body through animations of global data, trends and other information regarding the globe, on this sphere. And today, 45 years later, we clearly have no less need for this kind of clarity and perspective, but what we do have is improved technology.
در ۱۹۵۲، باکمینستر فولر طرح کاملاً متهورانه ای به نام ژئوسکوپ ارائه داد. یک کره ی چهل تکه (ژئودزیک) به قطر 61 متر که بر فراز تنگه ی East River نیویورک و در دید رس سازمان ملل آویزان شود مطمئناً، این یک ایده ی بزرگ بود و ایده ای بود که او احساس می کرد به وسیله ی آن می تواند از طریق نمایش پویانمایی داده های جهانی، روندها... و دیگر اطلاعات مربوط به زمین، روی این کره به اعضای سازمان ملل اطلاع رسانی کند و تصمیمهای آنها را تحت تاثیر قرار دهد... و امروز بعد از 45 سال ما همچنان به این گونه شفافیت و روشن بینی نیاز داریم. البته ما امروزه از فناوری پیشرفته هم برخورداریم.
Today we don't need one million light bulbs to create a spherical display. We can use LEDs. LEDs are smaller, they're cheaper, they're longer lasting, they're more efficient. Most importantly for this, they're faster. And this speed, combined with today's high-performance micro-controllers, allows us to actually simulate, in this piece, over 17,000 LEDs -- using just 64. And the way this happens is through the phenomenon of persistence of vision. But as this ring rotates at about 1,700 rpm -- that's 28 times per second. The equator's speed is actually about 60 miles per hour. There are four on-board micro-controllers that, each time this ring rotates it, as it passes the rear of the display, it picks up a position signal. And from that, the on-board micro-controllers can extrapolate the position of the ring at all points around the revolution and display arbitrary bitmap images and animations.
امروزه برای ساختن یک صفحه ی نمایش کروی یک میلیون لامپ به کار نمی بریم. بلکه از LED استفاده می کنیم. LED کوچکتر، ارزانتر، با دوام تر، کارا تر و در این مورد، از همه مهمتر، سریعتر از لامپ است. و این سرعت، به همراه میکروکنترلرهای با کارایی بالای امروزه به ما این امکان را داد که در این قطعه با استفاده از 64 LED، بیش از 17000 LED را شبیه سازی کنیم. و این امکان بر اثر پدیده ی تداوم دید به دست می آید. چون این حلقه حدوداً با سرعت 1700 دور در دقیقه می چرخد (یعنی 28 دور در ثانیه) سرعت در ناحیه ی استوایی حدود 97 کیلومتر در ساعت است. در اینجا چهار میکروکنترلر سوار شده که هر بار که حلقه می چرخد هنگام گذر از پشت نمایشگر یک سیگنال مکان دریافت می کند و میکروکنترلرها از اینجا می توانند موقعیت حلقه را در تمام نقاط در طی چرخش مشخص کنند. و نمایشگر، قسمتهایی از تصاویر ثابت و یا پویا را متناسب با موقعیت نشان می دهد.
But this is really just the beginning. In addition to higher resolution versions of this display, my father and I are working on a new patent-pending design for a fully volumetric display using the same phenomenon. It achieves this by rotating LEDs about two axes. So as you can see here, this is a, eleven-inch diameter circuit board. These blocks represent LEDs. And so you could see that as this disc rotates about this axis, it will create a disc of light that we can control. That's nothing new: that's a propeller clock; that's the rims that you can buy for your car. But what is new is that, when we rotate this disc about this axis, this disc of light actually becomes a sphere of light. And so we can control that with micro-controllers and create a fully volumetric, three-dimensional display with just 256 LEDs.
ولی این تازه آغاز راه است. غیر از نسخه هایی با رزولوشن بالاتر من و پدرم روی یک طرح جدید (درحال ثبت) کار می کنیم برای نمایش کاملاً حجمی با استفاده از همین پدیده. این امکان با چرخاندن LED ها روی دو محور به دست می آید. بنابراین همانطور که اینجا می بینید، این یک بورد به قطر 11 اینچ است این بلوکها به جای LED هستند. و همانطور که می بینید، هنگامی که صفحه دور این محور می چرخد یک صفحه ی نوری ایجاد می کند که ما می توانیم آن را کنترل کنیم. این چیز جدیدی نیست، این همان ساعت پروانه ای است. این مثل رینگ لاستیکی است که برای ماشینتان می خرید. ولی نکته ی جدید در آن این است که وقتی ما این صفحه را حول این محور می چرخانیم صفحه ی نور تبدیل می شود به کره ی نور که می توانیم آن را با میکروکنترلرها کنترل کنیم. و تنها با استفاده از 256 LED یک نمایشگر تمام حجمی سه بعدی بسازیم.
Now this piece is currently in process -- due out in May -- but what we've done is we've put together a small demo, just to show the geometric translation of points into a sphere. I've got a little video to show you, but keep in mind that this is with no electronic control, and this is also with only four LEDs. This is actually only about 1.5 percent of what the final display will be in May. So, take a look. And here you can see it's rotating about the vertical axis only, creating circles. And then, as the other axis kicks in, those actually blur into a volume. And the shutter speed of the camera actually makes it slightly less effective in this case.
این قطعه فعلاً تا ماه می در حال پردازش و تکمیل است ولی ما یک دموی کوچک آماده کرده ایم که تبدیل هندسی نقاط به یک کره را نشان دهیم. من یک فیلم کوتاه دارم که به شما نشان بدهم ولی این را در نظر داشته باشید که این کار بدون کنترل الکترونیک است. و تنها از چهار LED استفاده شده است. این عملاً 1.5 درصد نمایشگری است که در ماه می تکمیل خواهد شد. خب، ببینید. در اینجا می بینید که با چرخیدن فقط حول محور عمودی دایره هایی ایجاد می کند. و وقتی محور بعدی وارد عمل می شود، این دایره ها یک حجم را تداعی می کند. سرعت شاتر دوربین فیلم برداری ... تا حدی از حس این کار کاسته است.
But this piece is due out in May. It'll be on display at the Interactive Telecommunications Spring Show in Greenwich Village in New York City -- that's open to the public, definitely invite you all to come and attend -- it's a fantastic show. There are hundreds of student innovators with fantastic projects. This piece, actually, will be on display down in the Sierra Simulcast Lounge in the breaks between now and the end of the show. So I'd love to talk to you all, and invite you to come down and take a closer look. It's an honor to be here. Thanks very much.
ولی این دستگاه در ماه می بیرون می آید. و در نمایشگاه بهاره ی ITSS به نمایش درخواهد آمد. در دهکده ی گرینویچ نیویورک - نمایشگاه برای عموم آزاد است. از همه ی شما دعوت می کنم که حتماً تشریف بیاورید - نمایشگاه خارق العاده ای خواهد بود. صدها دانشجوی نوآور با پروژه هایی دیدنی آنجا خواهند بود. این دستگاه به نمایش درخواهد آمد در سالن Sierra Simulcast در زمانهای استراحت، از الان تا انتهای این برنامه. و من از همه ی شما دعوت می کنم که به آنجا بیایید و از نزدیک نگاهی به آن داشته باشید. حضور در این جمع مایه ی افتخار من است، از شما سپاسگزارم.
(Applause)
(تشویق حضار)