I'm a garbage man. And you might find it interesting that I became a garbage man, because I absolutely hate waste. I hope, within the next 10 minutes, to change the way you think about a lot of the stuff in your life. And I'd like to start at the very beginning. Think back when you were just a kid. How did look at the stuff in your life? Perhaps it was like these toddler rules: It's my stuff if I saw it first. The entire pile is my stuff if I'm building something. The more stuff that's mine, the better. And of course, it's your stuff if it's broken.
אני פועל זבל. וייתכן ותמצאו את העובדה מדוע הפכתי לפועל זבל מעניינת, משום שאני לחלוטין מתעב פסולת. אני מקווה, בעשר הדקות הבאות, לשנות את הדרך בה אתם חושבים על הרבה מהחפצים בחיים שלכם. ואני רוצה להתחיל מבראשית. חזרו אחורה וחשבו על תקופת ילדותכם. כיצד הסתכלתם על החפצים שהיו בחייכם? אולי זה היה כמו חוקי העולל הבאים: אלו חפצים שלי אם אני ראיתי אותם תחילה. כל הערמה כולה שלי אם אני בונה משהו. כמה שיותר חפצים שהם שלי, ככה יותר טוב. וכמובן, אלו הם חפציך אם הם מקולקלים.
(Laughter)
(צחוק)
Well after spending about 20 years in the recycling industry, it's become pretty clear to me that we don't necessarily leave these toddler rules behind as we develop into adults. And let me tell you why I have that perspective. Because each and every day at our recycling plants around the world we handle about one million pounds of people's discarded stuff. Now a million pounds a day sounds like a lot of stuff, but it's a tiny drop of the durable goods that are disposed each and every year around the world -- well less than one percent. In fact, the United Nations estimates that there's about 85 billion pounds a year of electronics waste that gets discarded around the world each and every year -- and that's one of the most rapidly growing parts of our waste stream. And if you throw in other durable goods like automobiles and so forth, that number well more than doubles. And of course, the more developed the country, the bigger these mountains.
ובכן לאחר שביליתי כעשרים שנה בתעשיית המיחזור, זה נהיה מאוד ברור לי שאנחנו לא בהכרח מותירים את חוקי העולל האלה מאחור בזמן שאנו מתפתחים למבוגרים. והרשו לי לספר לכם מדוע יש לי את נקודת המבט הזו. מכיוון שבכל יום ויום במפעלי המיחזור שלנו ברחבי העולם אנחנו מטפלים בכחצי מיליון קילוגרם של חפצים שהושלכו על ידי אנשים. עכשיו, חצי מיליון קילוגרם ביום נשמע כמו הרבה חפצים, אבל זה רק טיפה בים הסחורות העמידות אשר מושלכות בכל שנה ושנה ברחבי העולם -- פחות מאחוז אחד. למעשה, האו"ם מעריך כי יש בערך 39 מיליארד קילוגרם של פסולת אלקטרונית כל שנה אשר מושלכת ברחבי העולם בכל שנה ושנה -- וזהו אחד מזרמי הפסולת שלנו הגדלים במהירות. ואם תכניסו לעניין סוחרות עמידות נוספות כמו מכוניות וכן הלאה, המספר יותר מיוכפל. וכמובן, ככל שהמדינה מפותחת יותר, כך גדלים ההרים האלו.
Now when you see these mountains, most people think of garbage. We see above-ground mines. And the reason we see mines is because there's a lot of valuable raw materials that went into making all of this stuff in the first place. And it's becoming increasingly important that we figure out how to extract these raw materials from these extremely complicated waste streams. Because as we've heard all week at TED, the world's getting to be a smaller place with more people in it who want more and more stuff. And of course, they want the toys and the tools that many of us take for granted.
עכשיו כאשר אתם רואים את ההרים האלו, רוב האנשים חושבים על זבל. אנחנו רואים מכרות על-קרקעיים. והסיבה שאנו רואים מכרות היא מכיוון שישנם הרבה חומרי גלם בעלי ערך שהשתמשו בהם כאשר יצרו את כל החפצים הללו מלכתחילה. וזה הופך להיות חשוב יותר ויותר שנבין כיצד ניתן להוציא את חומרי הגלם הללו מאותם זרמי הפסולת המורכבים. משום שכמו ששמענו כל השבוע הזה ב-TED, העולם הולך ונהיה מקום קטן יותר עם כל האנשים שחיים בו והרוצים עוד ועוד דברים. וכמובן, הם רוצים את הצעצועים ואת הכלים שרובנו לוקחים כמובן מאליו.
And what goes into making those toys and tools that we use every single day? It's mostly many types of plastics and many types of metals. And the metals, we typically get from ore that we mine in ever widening mines and ever deepening mines around the world. And the plastics, we get from oil, which we go to more remote locations and drill ever deeper wells to extract. And these practices have significant economic and environmental implications that we're already starting to see today.
ומה נצרך בכדי לעשות את אותם צעצועים וכלים שאנו משתמשים בהם בכל יום ויום? זה ברובו הגדול סוגים רבים של פלסטיק וסוגים רבים של מתכות. ואת המתכות, אנו לרוב מקבלים ממחצב שאנו כורים במכרות ההולכים ומתדלדלים וההולכים ונחפרים עמוק יותר סביב העולם. ואת הפלסטיק, אנחנו מייצרים מנפט, אשר בשבילו אנחנו הולכים אל אתרים רחוקים יותר וקודחים בארות עמוקים יותר בכדי להוציא אותו משם. ולמנהגים האלו יש השלכות כלכליות וסביבתיות משמעותיות שאנו כבר מתחילים לראותם כיום.
The good news is we are starting to recover materials from our end-of-life stuff and starting to recycle our end-of-life stuff, particularly in regions of the world like here in Europe that have recycling policies in place that require that this stuff be recycled in a responsible manner. Most of what's extracted from our end-of-life stuff, if it makes it to a recycler, are the metals. To put that in perspective -- and I'm using steel as a proxy here for metals, because it's the most common metal -- if your stuff makes it to a recycler, probably over 90 percent of the metals are going to be recovered and reused for another purpose. Plastics are a whole other story: well less than 10 percent are recovered. In fact, it's more like five percent. Most of it's incinerated or landfilled.
החדשות הטובות הן שאנו מתחילים למצות חומרים מהחפצים שלנו שאינם מתכלים ואנו מתחילים למחזר את החפצים הבלתי מתכלים שלנו, במיוחד באיזורים בעולם כמו כאן באירופה בה ישנה מדיניות מיחזור מבוססת המחייבת שהחפצים הללו ימוחזרו באופן אחראי. רוב הדברים שמחלצים מהחפצים הלא מתכלים הללו, אם הם מגיעים למיחזור, הן המתכות. בכדי לשים זאת בפרופורציה -- ואני משתמש פה בפלדה כדוגמה עבור המתכות, משום שזו היא המתכת הנפוצה מכל -- אם החפצים שלכם מגיעים למיחזור, ככל הנראה למעלה מ-90 אחוזים של המתכות יוחזרו ויושמשו בשנית עבור מטרות אחרות. פלסטיקים הם סיפור שונה בתכלית. הרבה פחות מעשרה אחוזים יוחזרו. למעשה, זה יותר באזור חמישה אחוז. הרוב הגדול הולך למשרפה או למטמנה.
Now most people think that's because plastics are a throw-away material, have very little value. But actually, plastics are several times more valuable than steel. And there's more plastics produced and consumed around the world on a volume basis every year than steel. So why is such a plentiful and valuable material not recovered at anywhere near the rate of the less valuable material? Well it's predominantly because metals are very easy to recycle from other materials and from one another. They have very different densities. They have different electrical and magnetic properties. And they even have different colors. So it's very easy for either humans or machines to separate these metals from one another and from other materials. Plastics have overlapping densities over a very narrow range. They have either identical or very similar electrical and magnetic properties. And any plastic can be any color, as you probably well know. So the traditional ways of separating materials just simply don't work for plastics.
רוב האנשים חושבים שזה כך כי פלסטיקים הם חומרים שזורקים, ובעלי ערך פעוט. אך למעשה, פלסטיקים הם בעלי יותר ערך פי כמה מונים מפלדה. ויותר פלסטיקים מיוצרים ונצרכים מסביב לעולם על בסיס גבוה בכל שנה מאשר פלדה. אז מדוע חומר כה שופע ויקר ערך אינו ממוחזר בשום מקום באותה רמה של החומר הפשוט יותר? ובכן זה בעיקר מכיוון שמתכות קל מאוד למחזר ולהבדיל מחומרים אחרים ואחת מן השנייה. יש להן צפיפויות שונות מאוד. יש להן תכונות אלקטרוניות ומגנטיות שונות. ואף יש להן צבעים שונים. אז זה קל מאוד בין אם לאנשים ואם למכונות להפריד את המתכות האלו אחד מן השני ומחומרים אחרים. לפלסטיקים יש צפיפויות חופפות בטווח צר מאוד. יש להם תכונות אלקטרוניות או מגנטיות זהות או מאוד דומות. וכל פלסטיק יכול ללבוש כל צבע, כמו שאתם בוודאי יודעים. אז הדרך המסורתית להפרדת חומרים פשוט לא עובד עם פלסטיקים.
Another consequence of metals being so easy to recycle by humans is that a lot of our stuff from the developed world -- and sadly to say, particularly from the United States, where we don't have any recycling policies in place like here in Europe -- finds its way to developing countries for low-cost recycling. People, for as little as a dollar a day, pick through our stuff. They extract what they can, which is mostly the metals -- circuit boards and so forth -- and they leave behind mostly what they can't recover, which is, again, mostly the plastics. Or they burn the plastics to get to the metals in burn houses like you see here. And they extract the metals by hand. Now while this may be the low-economic-cost solution, this is certainly not the low-environmental or human health-and-safety solution. I call this environmental arbitrage. And it's not fair, it's not safe and it's not sustainable.
תוצאה נוספת לכך שכה קל לאנשים למחזר מתכות היא שרבים מחפצינו מהעולם המפותח -- וצר לי לומר, בעיקר מארה"ב, בה אין לנו שום מדיניות מיחזור כמו כאן באירופה -- מוצאים את דרכם למדינות המתפתחות עבור מיחזור זול. אנשים, בעבור דולר ליום, מחטטים בחפציכם. הם מוציאים את מה שהם יכולים, שזה ברובו המתכות -- מעגלים חשמליים וכן הלאה -- והם מותירים מאחור לרוב את מה שאי אפשר למחזר -- שזה, שוב, לרוב פלסטיקים. או שהם שורפים את הפלסטיקים בכדי להשיג את המתכות במשרפות כמו שאתם רואים כאן. והם מוציאים את המתכות בידיים. עכשיו, למרות שזהו ככל הנראה הפתרון הזול כלכלי, זה ללא ספק לא סביבתי במיוחד או פתרון שפונה לביטחון ולבריאות של בני האדם. אני קורא לזה ארביטראז' סביבתי. וזה לא הוגן, זה לא בטוח וזה אינו בר קיימא.
Now because the plastics are so plentiful -- and by the way, those other methods don't lead to the recovery of plastics, obviously -- but people do try to recover the plastics. This is just one example. This is a photo I took standing on the rooftops of one of the largest slums in the world in Mumbai, India. They store the plastics on the roofs. They bring them below those roofs into small workshops like these, and people try very hard to separate the plastics, by color, by shape, by feel, by any technique they can. And sometimes they'll resort to what's known as the "burn and sniff" technique where they'll burn the plastic and smell the fumes to try to determine the type of plastic. None of these techniques result in any amount of recycling in any significant way. And by the way, please don't try this technique at home.
כעת מכיוון שהפלסטיקים הם כה מגוונים -- ודרך אגב, השיטות האחרות אינן מובילות למיחזורם של הפלסטיקים, מן הסתם -- אבל אנשים אכן מנסים למחזר את הפלסטיקים. זוהי רק דוגמה אחת. צילמתי את התמונה הזו כשעמדתי על הגגות של אחת משכונות העוני הגדולות בעולם במומביי, הודו. הם אוגרים את הפלסטיקים על הגגות. הם לוקחים אותם אל מתחת לגגות לבתי מלאכה קטנים כמו זה, ואנשים עמלים קשות בניסיון למיין את הפלסטיקים, על פי צבע, צורה, מרגש, בכל שיטה שהם מסוגלים. ולעיתים הם ישתמשו במה שמכור כשיטת ה"שריפה והרחה" בה הם ישרפו את הפלסטיק ויריחו את האדים בכדי לנסות ולהחליט איזה סוג של פלסטיק הוא זה. אף לא אחת מהשיטות הללו אינה מגיעה בסופו של דבר למיחזור שווה ערך. ודרך אגב, אנא אל תנסו את השיטה הזו בבית.
So what are we to do about this space-age material, at least what we used to call a space-aged material, these plastics? Well I certainly believe that it's far too valuable and far too abundant to keep putting back in the ground or certainly send up in smoke. So about 20 years ago, I literally started in my garage tinkering around, trying to figure out how to separate these very similar materials from each other, and eventually enlisted a lot of my friends, in the mining world actually, and in the plastics world, and we started going around to mining laboratories around the world. Because after all, we're doing above-ground mining. And we eventually broke the code. This is the last frontier of recycling. It's the last major material to be recovered in any significant amount on the Earth. And we finally figured out how to do it. And in the process, we started recreating how the plastics industry makes plastics.
אז מה אנחנו אמורים לעשות עם החומר הזה של עידן החלל, לפחות החומר שנהגנו לקרוא לו חומר של עידן החלל, הפלסטיקים האלו? ובכן אני בהחלט מאמין שזהו חומר שהוא יותר מדי רב ערך ושנמצא בשפע מכדי להמשיך להחזיר אותו לאדמה ובטוח שלא להפוך אותו לעשן. אז לפני כעשרים שנה, אני פשוטו כמשמעו התחלתי להתעסק במחסן שלי, בנסותי להבין כיצד להפריד את החומרים הדומים הללו אחד מהשני, ובסופו של דבר התחלתי לגייס הרבה מחבריי, המגיעים מעולם הכרייה למעשה, ומעולם הפלסטיק, והתחלנו להגיע למעבדות כרייה מסביב לעולם. משום שאחרי הכל, אנחנו עוסקים בכרייה על-קרקעית. ובסופו של דבר פיצחנו את הקוד. זהו קו החזית של מיחזור. זהו החומר המשמעותי האחרון שהצליח להיות ממוחזר בצורה משמעותית על פני כדור הארץ. וסוף סוף הבנו כיצד לעשות זאת. ובתהליך, התחלנו ליצור מחדש את הדרך בה תעשיית הפלסטיק מייצרת פלסטיקים.
The traditional way to make plastics is with oil or petrochemicals. You breakdown the molecules, you recombine them in very specific ways, to make all the wonderful plastics that we enjoy each and every day. We said, there's got to be a more sustainable way to make plastics. And not just sustainable from an environmental standpoint, sustainable from an economic standpoint as well. Well a good place to start is with waste. It certainly doesn't cost as much as oil, and it's plentiful, as I hope that you've been able to see from the photographs. And because we're not breaking down the plastic into molecules and recombining them, we're using a mining approach to extract the materials.
הדרך המסורתית לייצר פלסטיקים היא עם נפט או דרך פטרוכימיה. אתה מפרק את המולקולות, ומחבר אותם מחדש בדרכים ספציפיות מאוד, בכדי לייצר את המגוון הנפלא של הפלסטיקים שאנו משתמשים בו בכל יום ויום. אנחנו אמרנו, חייבת להיות דרך טובה יותר לייצר פלסטיקים. ולא רק טובה יותר מנקודת מבט סביבתית, אלא טובה יותר גם מנקודת מבט כלכלית. ובכן מקום טוב להתחיל בו הוא עם פסולת. היא בטוח לא עולה כמו נפט, והיא קיימת בשפע, כמו שאני מקווה שהצלחתם להבין דרך התמונות. ומכיוון שאנחנו לא מפרקים את הפלסטיקים לכדי מולקולות ומחברים אותם מחדש, אנחנו משתמשים בגישה מקורבת לכרייה בכדי להוציא את החומרים.
We have significantly lower capital costs in our plant equipment. We have enormous energy savings. I don't know how many other projects on the planet right now can save 80 to 90 percent of the energy compared to making something the traditional way. And instead of plopping down several hundred million dollars to build a chemical plant that will only make one type of plastic for its entire life, our plants can make any type of plastic we feed them. And we make a drop-in replacement for that plastic that's made from petrochemicals. Our customers get to enjoy huge CO2 savings. They get to close the loop with their products. And they get to make more sustainable products.
אנחנו הורדנו בצורה משמעותית את עלות ההון בציוד במפעלינו. אנחנו חוסכים אנרגיה בכמויות גדולות. אני לא יודע כמה עוד פרויקטים על כדור הארץ ברגע זה יכולים לחסוך 80 עד 90 אחוזים מהאנרגיה בהשוואה לייצור דבר מה בדרכו המקורית. ובמקום לשחרר כמה מאות מיליוני דולרים בכדי לבנות מפעל כימי אשר רק ייצר סוג אחד של פלסטיק למשך תקופת קיומו, המפעלים שלנו יכולים לייצר כל סוג של פלסטיק שאנחנו מאכילים אותם. ואנחנו מייצרים תחליף עבור הפלסטיק שמיוצר מפטרוכימיה. הלקוחות שלנו נהנים מחיסכון אדיר ב- CO2. הם מצליחים לסגור את המעגל עם המוצר שלהם. והם מצליחים לייצר יותר מוצרים ברי קיימא.
In the short time period I have, I want to show you a little bit of a sense about how we do this. It starts with metal recyclers who shred our stuff into very small bits. They recover the metals and leave behind what's called shredder residue -- it's their waste -- a very complex mixture of materials, but predominantly plastics. We take out the things that aren't plastics, such as the metals they missed, carpeting, foam, rubber, wood, glass, paper, you name it. Even an occasional dead animal, unfortunately. And it goes in the first part of our process here, which is more like traditional recycling. We're sieving the material, we're using magnets, we're using air classification. It looks like the Willy Wonka factory at this point.
בזמן הקצר שנותר לי, אני רוצה לתת לכם טעימה קטנה בכדי להבין כיצד אנו עושים זאת. זה מתחיל עם מחזרי המתכת שלנו אשר גורסים את החפצים שלנו לחתיכות מאוד קטנות. הם מוציאים וממחזרים את המתכות והם משאירים מאחור את מה שנקרא משקע גרוס - זוהי הפסולת שלהם -- תערובת מורכבת מאוד של חומרים, אך בעיקרם פלסטיק. אנחנו מוציאים את כל אשר אינו פלסטיק, כמו המתכות שהתפספסו, אריגים, קצף, גומי, עץ, זכוכית, נייר, מה שלא תרצו. מדי פעם אפילו חיה מתה, לצערנו הרב. וזה הולך אל החלק הראשון של התהליך שלנו כאן, שהוא יותר כמו מיחזור מסורתי. אנחנו מסננים את החומר, אנחנו משתמשים במגנטים, אנחנו משתמשים בסיווג אוויר. זה נראה כמו מפעל השוקולד של ווילי וונקה בשלב זה.
At the end of this process, we have a mixed plastic composite: many different types of plastics and many different grades of plastics. This goes into the more sophisticated part of our process, and the really hard work, multi-step separation process begins. We grind the plastic down to about the size of your small fingernail. We use a very highly automated process to sort those plastics, not only by type, but by grade. And out the end of that part of the process come little flakes of plastic: one type, one grade. We then use optical sorting to color sort this material. We blend it in 50,000-lb. blending silos. We push that material to extruders where we melt it, push it through small die holes, make spaghetti-like plastic strands. And we chop those strands into what are called pellets. And this becomes the currency of the plastics industry. This is the same material that you would get from oil. And today, we're producing it from your old stuff, and it's going right back into your new stuff.
בסופו של התהליך הזה, יש לנו תערובת פלסטיק מורכבת: סוגים שונים של פלסטיקים ודרגות שונות של פלסטיקים. אלו עוברים לחלק יותר מתוחכם בתהליך שלנו, ותהליך ההפרדה הרב שכבתי המורכב מתחיל. אנחנו טוחנים את הפלסטיק לכדי הגודל של הציפורן הקטנה שלכם. אנחנו משתמשים בתהליך אוטומטי מורכב בכדי לברור את הפלסטיקים, לא רק לפי סוג אלא לפי דרגה. ובסופו של התהליך הזה יוצאים פתיתים קטנים של פלסטיק: סוג אחד, דרגה אחת. אז אנו משתמשים בברירה חזותית לברור לפי הצבע של החומר הזה. אנחנו מערבבים אותו בממגורות בעלות תכולה של 22 אלף קילוגרם. אנחנו דוחפים את החומר הזה אל תוך מכבשי-שיחול, שם אנו ממיסים אותו, דוחפים אותו דרך חורי שבלונה קטנים, היוצרים רצועות פלסטיק דמויות ספגטי. ואנו קוצצים את הרצועות האלו למה שנקרא כדוריות. וזה הופך להיות המטבע של עולם תעשיית הפלסטיקים. זהו אותו חומר שאתם הייתם משיגים מנפט. והיום, אנחנו מייצרים את זה מהחפצים הישנים שלכם, וזה הולך הישר אל תוך החפצים החדשים שלכם.
(Applause)
(מחיאות כפיים)
So now, instead of your stuff ending up on a hillside in a developing country or literally going up in smoke, you can find your old stuff back on top of your desk in new products, in your office, or back at work in your home. And these are just a few examples of companies that are buying our plastic, replacing virgin plastic, to make their new products.
אז עכשיו, במקום שחפציכם יגיעו אל מורד גבעה במדינה מתפתחת או שיהפכו פשוטו כמשמעו לעשן, אתם יכולים למצוא את חפציכם הישנים שוב על שולחנכם בחלק ממוצרים חדשים, במשרדכם, או בחזרה בעבודה בביתכם. ואלו הם רק כמה דוגמות של חברות הקונות את הפלסטיקים שלנו, המחליפות פלסטיק בתולי, בכדי לייצר את המוצרים החדשים שלהם.
So I hope I've changed the way you look at at least some of the stuff in your life. We took our clues from mother nature. Mother nature wastes very little, reuses practically everything. And I hope that you stop looking at yourself as a consumer -- that's a label I've always hated my entire life -- and think of yourself as just using resources in one form, until they can be transformed to another form for another use later in time. And finally, I hope you agree with me to change that last toddler rule just a little bit to: "If it's broken, it's my stuff."
אז אני מקווה ששיניתי את הדרך בה אתם מסתכלים על לפחות חלק מהחפצים שבחייכם. אנחנו לקחנו את הרמזים שלנו מאמא אדמה. אמא אדמה מבזבזת מעט מאוד, משתמשת בשנית בכמעט כל דבר. ואני מקווה שתפסיקו לראות את עצמכם כצרכנים -- זוהי תווית שתמיד תיעבתי בכל חיי -- וחישבו על עצמכם כמשתמשים במשאבים בצורה אחת, עד אשר הם יוכלו להיהפך לצורה אחרת לשימוש אחר בזמן מאוחר יותר. ולבסוף, אני מקווה שתסכימו איתי ותשנו את חוק העולל האחרון רק במעט ל: "אם זה שבור, זה החפץ של מייק."
Thank you for your time.
תודה לכם על זמנכם.
(Applause)
(מחיאות כפיים)