So I'd like you to join me on a field trip, and I want to go to the beach, and take you all to the beach and so enjoy the sea air and the salt spray. And let's go down to the water's edge, and you're going to notice is we're getting knocked around by the waves, and it's really difficult to stay in place. But now, look down, and what you're going to see is that the rocks are covered by all sorts of sea creatures that are just staying there in place, no problem. And it turns out that if you want to survive in this really demanding environment, your very existence is dependent upon your ability to make glue, actually.
Ik neem jullie mee op excursie naar het strand om te genieten van de zoute zeelucht. We gaan het water in en je voelt je heen en weer geduwd door de golven waardoor je moeilijk op je plaats kan blijven. Maar kijk nu naar beneden en je ziet dat de rotsen bedekt zijn met allerlei zeedieren die zonder problemen blijven zitten. En het blijkt dat als je in deze moeilijke omgeving wil overleven, je bestaan eigenlijk afhankelijk is van hoe goed je lijm kan maken.
So let me introduce you to some of the heroes of our story, just a few of them. So these are mussels, and you'll notice they're covering the rocks. They've made adhesives, and they're sticking down on the rocks, and they're also sticking to each other, actually. So they're hunkered down together as a group.
Ik stel jullie enkele helden van ons verhaal voor. Enkele. Dit zijn mosselen en je ziet dat ze de rotsen bedekken. Ze maken lijmen waardoor ze aan de rotsen kleven en ook aan elkaar. Ze vormen dus samen een groep.
This is a close-up photograph of an oyster reef, and oysters, they're amazing. What they do is they cement to each other, and they build these huge, extensive reef systems. They can be kilometers long, they can be meters deep, and arguably, they're the most dominant influence on how healthy any coastal marine ecosystem is going to be, because what they do is they're filtering the water constantly, they're holding sand and dirt in place. Actually, other species live inside of these reefs. And then, if you think about what happens when a storm comes in, if the storm surge first has to hit miles of these reefs, the coast behind it is going to be protected. So they're really quite influential.
Dit is een close-up van een oesterrif. En oesters, die zijn geweldig. Ze lijmen zich aan elkaar en bouwen daardoor enorme, uitgestrekte rifsystemen. Die kunnen kilometers lang en meters diep zijn en hebben misschien wel de meest dominante invloed op de gezondheid van mariene ecosystemen aan de kust. Ze filteren het water voortdurend en fixeren zo zand en vuil. In feite leven andere soorten binnen deze riffen. Als je bedenkt over wat er gebeurt als het gaat stormen, als de stormvloed eerst kilometers riffen moet overbruggen, zal de kust erachter beschermd worden. Dus hun invloed is behoorlijk groot.
If you've been to any rocky beach pretty much anywhere in the world, you're probably familiar with what barnacles look like. What these animals do -- and there's many others, these are just three of them -- is they make adhesives, they stick to each other, they stick to the rocks and they build communities, and by doing this, there's a lot of survival advantages they get. So one of them is that just any individual is subjected to less of the turbulence and all the damaging features that can happen from that environment. So they're all hunkered down there.
Als je ooit ergens ter wereld op een rotsachtig strand bent geweest, weet je waarschijnlijk hoe zeepokken eruitzien. Deze dieren -- en er zijn vele anderen, dit zijn er slechts drie -- ze maken lijmen, ze kleven aan elkaar en aan de rotsen en bouwen gemeenschappen waardoor hun overlevingskansen een stuk beter worden. Eén ervan is dat elk individu minder last heeft van turbulentie en andere schadelijke eigenschappen van die omgeving. Dus hurken ze allemaal bij elkaar.
Then, also, there's a safety in numbers thing, because it also helps you keep away the predators, because if, say, a seagull wants to pick you up and eat you, it's more difficult for the seagull if they're all stuck together.
Er is ook veiligheid door het aantal omdat het de roofdieren weghoudt. Want bijvoorbeeld een meeuw kan je moeilijker opeten, als je met z'n allen aan elkaar plakt.
And then another thing is it also helps with reproductive efficiency. So you can imagine that when Mr. and Mrs. Barnacle decide, "OK, it's time to have little baby barnacles" -- I won't tell you how they do that just yet -- but when they decide it's time to do that, it's a lot easier and their reproductive efficiency is higher if they're all living close together.
Het helpt ook bij de reproductieve efficiëntie. Je kunt je voorstellen dat wanneer meneer en mevrouw Zeepok beslissen: "Oké, het is tijd voor wat babyzeepokken." -- Ik vertel niet hoe dat gaat -- maar wanneer zij ertoe besluiten, dan is het een stuk eenvoudiger en hun reproductieve rendement hoger als ze allemaal dicht bij elkaar leven.
So we want to understand how they do this, how do they stick, and I can't really tell you all the details, because it's something we're still trying to figure out, but let me give you a little flavor of some of the things that we're trying to do.
We willen begrijpen hoe ze dit doen, hoe ze blijven kleven. Ik zal niet in detail treden, want het is iets dat we nog proberen uit te vissen. Maar ik geef jullie een voorproefje van een aantal dingen die we uitproberen.
This is a picture of one of the aquarium systems we have in our lab, and everything in the image is part of the system, and so what we do is we keep -- and you can see in the glass tank there in the bottom, there's a bunch of mussels, we have the water chilled, we have the lights cycled, we actually have turbulence in the system because the animals make more adhesives for us when the water is turbulent. So we induce them to make the adhesive, we collect it, we study it. They're here in Indiana. As far as they know, they're in Maine in February, and they seem to be pretty happy, as far as we can tell.
Dit is een foto van één van de aquaria in ons lab. Alles op de foto maakt deel uit van het systeem. In de glazen bak zie je op de bodem een hoopje mosselen, het water koelen we, de lichten imiteren dag en nacht, er is turbulentie in het systeem omdat de dieren meer lijm maken als het water turbulent is. We zetten ze aan om lijm te maken, die we verzamelen en bestuderen. Hier zijn ze in Indiana. Voor zover zij weten, zijn ze in Maine in februari en ze lijken erg gelukkig voor zover we kunnen nagaan.
And then we also work with oysters, and up top, it's a photo of a small reef in South Carolina, and what we're most interested in is seeing how they attach to each other, how they connect. And so what you can see in the bottom image is there's two oysters that are cementing to each other. And we want to know what's in between, and so a lot of times, we'll cut them and look down, and in the next series of images we have here, you can see, on the bottom, we'll have two shells, the shell of one animal and the shell of another animal, and the cement's in between. And if you look at the image on the right, what you can maybe see is that there's structure in the shell of each animal, but then, the cement actually looks different. And so we're using all sorts of fancy biology and chemistry tools to understand what's going on in there, and what we're finding is the structures are different and the chemistry is actually different, and it's quite interesting.
We werken ook met oesters. Bovenaan zie je een foto van een klein rif in South Carolina. Het meest geïnteresseerd zijn we in hoe ze zich aan elkaar te bevestigen, hoe ze aansluiten. In de onderste afbeelding zie je dat twee oesters zich aan elkaar lijmen. Wij willen weten wat ertussen zit. en af en toe knippen we ze van elkaar en kijken ernaar. Op de volgende reeks beelden zie je onderaan twee schelpen, de schelp van één dier en de schelp van een ander met het cement ertussen. Als je kijkt naar de afbeelding rechts, zie je misschien de structuur in de schelp van elk dier, maar dan ziet de cement er eigenlijk anders uit. Dus gebruiken we allerlei knappe biologie- en chemietechnieken om te begrijpen wat er daar aan de hand is. We vinden verschillende structuren en de chemie varieert, wat heel interessant is.
And then this picture -- I guess let me step back before I tell you what this is. So do you know the cartoon "The Magic School Bus"? Or if you're a little bit older, "Fantastic Voyage," right? And you remember, they had these characters that they would shrink down to these microscopic levels, and then they would sort of swirl in and swim around and fly around all these biological structures? I think of this as like that, except for it's real, in this case. And so what we did is we have two oysters that are stuck together, and this area used to be completely filled in with the cement, and what we're finding is that the cement has lots of different components in there, but broadly speaking, there are hard, non-sticky parts and there are soft, sticky parts, and what we did is we removed the non-sticky parts selectively to see what's left for what's actually attaching the animals, and what we got is this, and we can see there's this sticky adhesive that's holding them together. And I just think it's a really cool image, because you can imagine yourself flying in and going back there.
En dan dit beeld -- Even een stapje terug voordat ik jullie vertel wat het is. Ken je de cartoon ‘The Magic School Bus’? Of als je wat ouder bent ‘Fantastic Voyage’, toch? Weet je nog, met die personnages die ze lieten krimpen tot op microscopisch niveau, en die dan rondzwierven en rondzwommen tussen al die biologische structuren? Zo bekijk ik het, maar nu is het echt. We namen twee aan elkaar geplakte oesters. Dit stukje was opgevuld met lijm en we vonden dat die lijm veel verschillende componenten bevatte, maar in grote lijnen zijn er harde, niet-plakkende delen en zachte, plakkende delen. We verwijderden selectief de niet-plakkende delen om te zien wat er overbleef dat de dieren echt bij elkaar hield. We kregen dit en zien dan deze kleverige lijm die hen bij elkaar houdt. Ik hou van deze afbeelding, want je kunt je voorstellen dat je erin rondzwemt.
Anyways, those are some of the things we're doing to understand how marine biology is making these materials. And from a fundamental perspective, it's really exciting to learn. But what we do want to do with this information? Well, there's a lot of technological applications if we can harness what the animals are doing.
Hoe dan ook zijn dat enkele dingen die we doen om te begrijpen hoe mariene biologie deze materialen aanmaakt. In fundamenteel perspectief is het echt spannend om dit te begrijpen. Maar wat willen we doen met deze informatie? Er zijn een hoop technologische toepassingen als we kunnen benutten wat deze dieren doen.
So let me give you one example. So imagine you're at home and you break your favorite figurine or a mug or something like that? You want to put it back together. So where do you go? You go to my favorite place in town, which is the glue aisle of the hardware store. I know where you spend your nights, because you're all hip, cool people, because you're here, and you're going to the bars and concerts -- this is where I hang out every night. So anyways, so what I want you to do is get one of every adhesive that's on the shelf, bring it home, but before you try to put things back together, I want you to try to do it in a bucket of water. It's not going to work, right? We all know this. So obviously, marine biology has solved this, so what we need to do is figure out ways to be able to copy this ourselves. And one of the issues here is, you can't just go and get the materials from the beach, because if you get a bunch of mussels and try to milk them for their adhesive, you'll get a little bit of material, but you're never going to have enough to do anything with, just enough to see. We need to scale this up, ideally maybe train car scale.
Ik geef een voorbeeld. Je breekt thuis je favoriete beeldje of mok of iets dergelijks? Je wil het repareren. Waar ga je heen? Naar mijn favoriete plek in de stad, het gangpad met lijmen in de bouwmarkt. Ik weet waar jullie je nachten doorbrengen, want jullie zijn hippe, coole mensen, omdat jullie hier zijn, jullie gaan naar de bars en concerten -- maar daar hang ik elke avond rond. Nu moet je één exemplaar van elke lijm op dat rek meenemen, maar voordat je probeert om de dingen weer in elkaar te zetten, wil ik dat je het uittest in een emmer water. Dat gaat niet, hé? Dat weten we allemaal. De mariene biologie heeft dit duidelijk opgelost, dus moeten we erachter zien te komen hoe we dat zelf kunnen nabootsen. Een van de problemen is dat je niet zomaar wat materiaal van het strand kan halen, want als je een bos mosselen probeert te melken voor wat lijm, krijg je wel wat materiaal, maar nooit genoeg om er iets mee te doen -- net genoeg om het te bekijken. We moeten dit opschalen, liefst tot de schaal van een treinwagon of zo.
So on the top is an image of one of the types of molecules that the animals are using to make their glue, and what they are is they're very long molecules, they're called proteins, and these proteins happen to have some fairly unique parts in them that bring about the adhesive properties. What we want to do is take those little parts of that chemistry, and we want to put it into other long molecules that we can get but things that we can make on a really large scale, so you might know them as plastics or polymers, and so we're sort of simplifying what they do, but then putting that adhesion chemistry into these large molecules.
Bovenaan zie je één van de types moleculen die de dieren gebruiken om hun lijm te maken. Het zijn zeer lange moleculen, ze heten eiwitten. Die eiwitten hebben vrij unieke onderdelen die de kleverigheid veroorzaken. Wij willen fragmenten met die chemie inbouwen in andere lange moleculen, maar dan op grote schaal. Je kent ze wellicht als kunststoffen of polymeren. We doen het op een eenvoudiger manier dan zij, maar bouwen die kleefchemie in in die grote moleculen.
And we've developed many different adhesive systems in doing this, and when you make a new adhesive that looks pretty good, what do you do? You start running around the lab, just sticking stuff together. We took a tiny bit of a glue and glued together two pieces of metal and we wanted to hang something from it, so we used a pot of live mussels and thought we were very clever.
Daarmee hebben we veel verschillende lijmsoorten ontwikkeld, en als je een nieuwe, geschikte lijm maakte, wat doe je dan? Je rent rond in het lab om allerlei dingen aan elkaar te plakken. Hier lijmden we twee stukken metaal aan elkaar. We wilden er iets aan hangen om te testen en daarvoor gebruikten we een pot levende mosselen.
(Laughs)
En vonden onszelf erg slim. (Lacht)
We're obviously much more quantitative about this most often, and so we benchmark against commercial adhesives, and we actually have some materials now that are stronger than superglue. So to me, that's really cool. That's a good day in the lab. It's stronger than superglue.
Natuurlijk werken we meestal veel kwantitatiever en vergelijken we met commerciële lijmen. We hebben nu ook al materialen die sterker zijn dan superlijm. Dat vind ik echt cool. Een goede dag in het lab: sterker dan superlijm.
And here's something else that we can do. So this is a tank of seawater, and then, in that syringe is one of our adhesive formulations, and what we're doing is we're dispensing it completely underwater, on a piece of metal. And then, we want to make an adhesive bond, or joint, and so we take another piece of metal and we put it on there and just position it. And you want to let it set up for a while, give it a chance, so we'll just put a weight on it, nothing fancy. This is a tube with lead shot in it, nothing fancy. And then you let it sit for a while. So this has never seen air. It's completely underwater. And you pick it up. I never know what's going to happen. I'm always very anxious here. Pick it up ... and it's stuck.
Nog iets anders dat we kunnen. Dit is een tank met zeewater. In die spuit zit één van onze hechtmiddelformuleringen. We spuiten het, helemaal onder water, op een stuk metaal. We willen een lijmverbinding, dus nemen we een ander stuk metaal, leggen het er passend op. Je wil de lijm wat laten opstijven; we zetten er een gewicht op, niets bijzonders. Een buisje met loodhagel, niets bijzonders. Laat het een tijdje staan. Dit heeft nooit lucht gezien. Het is volledig onder water. En dan pak je het op. Ik weet nooit wat er gaat gebeuren. Altijd weer spannend. Pak het op ... en het zit vast.
To me, this is really cool. So we can actually get very strong underwater adhesion. Possibly, it's the strongest or at least one of the strongest underwater adhesives that's ever been seen. It's even stronger than the materials that the animals produce, so for us, it's pretty exciting. It's pretty cool.
Voor mij is dat echt cool. We krijgen zelfs onder water een zeer sterke hechting. Mogelijk is dit de sterkste of ten minste één van de sterkste onderwaterlijmen ooit. Het is zelfs sterker dan de materialen die de dieren produceren. Voor ons behoorlijk spannend. Best cool.
So what do we want to do with these things? Well, here are some products that you're probably really familiar with. So think about your cell phone, your laptop, plywood in most structures, the interior of your car, shoes, phone books, things like this. They're all held together with adhesives, and there's two main problems with the adhesives used in these materials. The first one is that they're toxic. So the worst offender here is plywood. Plywood, or a lot of furniture, or wood laminate in floors -- a main component of the adhesives here is formaldehyde, and it's maybe a compound you've heard of. It's a gas, and it's also a carcinogen, and so we're constructing a lot of structures from these adhesives, and we're also breathing a lot of this carcinogen. So not good, obviously. Right? The other issue is that these adhesives are all permanent. And so what do you do with your shoes or your car or even your laptop at the end of life, when you're done using it? For the most part, they end up in landfills. And there's a lot of precious materials in there we'd love to be able to get out and recycle them. We can't do it so easily because they're all stuck together permanently.
Wat willen we nu van deze dingen? Hier zijn een aantal producten waar je wel vertrouwd mee zal zijn. Denk aan je mobiele telefoon, laptop, multiplex in de meeste constructies, het interieur van je auto, schoenen, telefoonboeken, dat soort dingen. Ze worden bij elkaar gehouden met lijm, en er zijn twee grote problemen met de lijm in die materialen. Ten eerste dat ze giftig zijn. De ergste dader hier is multiplex. Multiplex, veel meubilair of houten laminaatvloeren -- een belangrijke component van de lijm is formaldehyde; misschien hoorde je er al van. Het is een kankerverwekkend gas en we bouwen een heleboel structuren met deze lijmen, en ademen daardoor veel kankerverwekkende stof in. Duidelijk slecht, toch? Het andere probleem is dat deze lijmen blijvend zijn. Wat doe je met je schoenen, je auto of zelfs je laptop als je ze afdankt? Voor het grootste deel eindigen ze op stortplaatsen. Er zitten veel kostbare materialen in die we graag zouden herwinnen en recyclen. Niet zo gemakkelijk omdat alles permanent aan elkaar is gelijmd.
So here's one approach we're taking to try and solve some of these problems, and what we've done here is we've taken another long molecule that we can actually get from corn, and then into that molecule, we've put some of the adhesion chemistry from the mussels. So because we've got the corn and we've got the mussels, we call this our surf-and-turf polymer. And it sticks. It sticks really well. It's very strong. It's also bio-based. That's nice. But maybe more importantly, here, it's also degradable, and we can degrade it under very mild conditions, with water. And so what we can do is we can set things up and we can bond them strongly when we want, but then we can also take them apart. It's something we're thinking about.
Dus hiermee proberen we enkele van deze problemen op te lossen. We gingen uit van een ander lang molecuul verkregen uit maïs. In dat molecuul bouwden we wat kleefchemie van mosselen in. Omdat we het verkregen van maïs en mosselen, noemen we dit ons ‘surf-en-turf’-polymeer. En het plakt. Het plakt echt goed. Het is erg sterk en ook biologisch. Mooi meegenomen. Maar misschien nog belangrijker is dat het ook afbreekbaar is. We kunnen het afbreken onder zeer milde omstandigheden, met water. Dat geeft ons de mogelijkheid om het zo sterk te binden als we willen, maar daarna kunnen we het ook weer uit elkaar halen. Goed om aan te denken.
And here is a place where a lot of us want to be. Well, actually, in this specific case, this is a place we do not want to be, but we'd like to replace this. So sutures, staples, screws: this is how we put you back together if you've had some surgery or an injury. It's just awful. It hurts. In the case of the sutures, look at how much you're making concentrated, mechanical stresses as you pull things together. You're making sites for infection. Poke holes in healthy tissue. It's not so good.
En hier willen wij naartoe. Nou eigenlijk, in dit specifieke geval, gaan we hier liever niet naartoe, maar we zouden dit graag willen vervangen. Dus hechtingen, nietjes, schroeven: zo zetten we je weer in elkaar na een operatie of een blessure. Bepaald geen pretje. Het doet pijn. In het geval van de hechtingen: kijk naar hoeveel geconcentreerde, mechanische spanningen je veroorzaakt als je dingen samentrekt. Je maakt broedplaatsen voor infectie. Je prikt gaatjes in gezond weefsel. Echt niet zo goed.
Or if you need a plate to hold together your bones, look at how much healthy bone you have to drill out just to hold the plate in place. So this is awful. To me, it looks like these were things devised in a medieval torture chamber, but it's our modern surgical joinery. So I'd love it if we could replace systems like these with adhesives. We're working on this, but this is not easy.
Of als je je botten met een plaat bij elkaar wilt houden, kijk dan hoeveel gezond bot je moet uitboren alleen maar om die plaat te bevestigen. Echt niet leuk. Voor mij lijkt dit bedacht in een middeleeuwse martelkamer, maar zo werkt onze moderne chirurgie. Het zou leuk zijn als we die systemen door lijm zouden kunnen vervangen. We werken eraan, maar het is niet gemakkelijk.
So think about what you would need for adhesives in these cases. So first of all, you would need an adhesive that is going to set in a wet environment. And if you look at the silly little picture there, it's just to illustrate that our bodies are about 60 percent water, so it's a wet environment. It's also to illustrate that this is why I am a scientist and not an artist. I did not miss my calling at all.
Bedenk wat voor soort kleefstoffen je hiervoor nodig zou hebben. In de eerste plaats moet je een lijm hebben die hecht in een vochtige omgeving. Dat gekke kleine plaatje daar illustreert dat onze lichamen voor ongeveer 60% uit water bestaan, dus is het een vochtige omgeving. Het illustreert ook dat ik wetenschapper en geen kunstenaar ben. Ik heb mijn roeping helemaal niet gemist.
So then the other requirements you need for a good biomedical adhesive: it needs to bond strongly, of course, and it needs to not be toxic. You don't want to hurt the patients. And getting any two of those requirements in a material is pretty easy. It's been done many times. But getting all three hasn't been done. It's very hard. And if you start talking to surgeons, they get picky -- "Oh, actually I want the adhesive to set on the same time frame as the surgery." Or, "Oh, I want the adhesive to degrade so the patient's tissues can remodel the site."
Andere vereisten voor een goede biomedische lijm zijn: hij moet natuurlijk sterk hechten en niet giftig zijn. Onschadelijk voor de patiënt. Twee van die vereisten in één materiaal krijgen, is vrij eenvoudig. Het is al vele malen gedaan. Maar met alle drie is het nog nooit gelukt. Dat is heel moeilijk. Als je praat met chirurgen, worden ze kieskeurig -- "Oh, eigenlijk wil ik dat de lijm zich al hecht tijdens de operatie." Of: "Oh, ik wil dat de lijm afbreekt zodat de weefsels van de patiënt hun vorm herstellen."
So this is really hard. We're working on it. This is just one image we have. So what we're doing is we're getting all sorts of bones and skin and soft and hard tissue, and sometimes we'll whack it with a hammer. Usually, we're cutting it in precise shapes. And then we glue them back together.
Dat is echt moeilijk. We zijn er mee bezig. Dit is slechts één foto ervan. We hebben allerlei botten en huid en zacht en hard weefsel, en soms slaan we er met een hamer op. Meestal snijden we het tot precieze vormen. Dan lijmen we ze weer aan elkaar.
We've got some exciting results, some strong materials, some things that look like they're not toxic, they set wet, but I'm not going to tell you we've solved the wet adhesion problem, because we haven't, but it's certainly in our sights for the future. So that's one place that we'd like to see things go farther down the road. And there are a lot of other places, too, you can imagine we might be better off if we could get more adhesives in there. Even cosmetics. So if you think about people putting on fake nails or eyelash extensions, what do they use? They use very toxic adhesives right now. So it's just ripe for replacement. That's something we'd like to do.
We kregen interessante resultaten, een aantal sterke materialen, die niet giftig lijken te zijn, die zich nat hechten, maar ik ga jullie niet vertellen dat we het natte-hechtingprobleem oplosten, want dat is niet zo. Maar we hebben het zeker in het vizier voor de toekomst. Daar zouden we graag zien dat de dingen verder geraken. Ook voor andere toepassingen kun je je voorstellen dat we beter af zouden zijn als we daar meer lijmen voor hadden. Zelfs voor cosmetica. Wat denk je dat mensen gebruiken om valse nagels of valse wimpers te plakken? Op dit moment zeer giftige lijm. Dus gewoon rijp voor vervanging. Dat is iets wat we willen doen.
And then there are other places too. So think about cars and planes. The lighter you can make them, the more fuel-efficient they're going to be. And so if we can get away from rivets and get away from welding and put more adhesives in there, then we might be better off with our future generation of transportation.
Er zijn ook andere zaken. Denk aan auto's en vliegtuigen. Hoe lichter je ze kan maken, hoe brandstofzuiniger ze worden. Als we klinknagels of lassen zouden kunnen vervangen door lijmen, zou dat goed zijn voor ons toekomstige vervoer.
So for us, this all comes back to the beach. So we look around and we wonder, "How do these sea creatures stick? And what can we do with the technology?" And I would argue that we have really a lot of things we can still learn from biology and from nature.
Dit breng ons weer terug naar het strand. We kijken rond en vragen ons af: "Hoe blijven die zeedieren plakken? En wat kunnen we doen met die technologie?" Ik zou zeggen dat we echt nog een heleboel kunnen leren van de biologie en de natuur.
So what I would like to encourage you all to do in the future is put down your nonrecyclable laptops and cell phones and go out and explore the natural world and then start asking some of your own questions.
Ik zou jullie willen aanmoedigen om jullie niet-recyclebare laptops en mobiele telefoons opzij te leggen en de natuurlijke wereld te gaan verkennen en je eigen vragen beginnen te stellen.
Thanks very much.
Heel erg bedankt.
(Applause)
(Applaus)