So I'd like you to join me on a field trip, and I want to go to the beach and take you all to the beach and so enjoy the sea air and the salt spray. And let's go down to the water's edge, and you'll notice we're getting knocked around by the waves, and it's really difficult to stay in place, right? But now, look down, and what you're going to see is that the rocks are covered by all sorts of sea creatures that are just staying there in place, no problem. It turns out that if you want to survive in this really demanding environment, your very existence is dependent upon your ability to make glue, actually. So let me introduce you to some of the heroes of our story, just a few of them. So these are mussels, and you'll notice they're covering the rocks, and what they've done is made adhesives, and they're sticking down on the rocks, and they're sticking to each other, actually. So they're hunkered down together as a group. This is a close-up photograph of an oyster reef, and oysters, they're amazing. What they do is they cement to each other, and they build these huge, extensive reef systems. They can be kilometers long, they can be meters deep, and arguably, they are the most dominant influence on how healthy any coastal marine ecosystem is going to be because what they do is they're filtering the water constantly, they're holding sand and dirt in place. Actually, other species live inside of these reefs. And then, if you think about what happens when a storm comes in, if the storm surge first has to hit miles of these reefs, the coast behind it is going to be protected. So they're really quite influential. If you've been to any rocky beach pretty much anywhere in the world, you're probably familiar with what barnacles look like. And so what these animals do - and there's many others, these are just three of them - is they make adhesives, they stick to each other and to the rocks and they build communities, and by doing this, there's a lot of survival advantages they get. So one of them is that just any individual is subjected to less of the turbulence and all the damaging features that can happen from that environment. So they're all hunkered down there. Then, also, there's a safety in numbers thing because it also helps you keep away the predators, because if, say, a seagull wants to pick you up and eat you, it's more difficult for the seagull if they're stuck together. And then another thing is it also helps with reproductive efficiency. So you can imagine that when Mr. and Mrs. Barnacle decide, "OK, it's time to have little baby barnacles" - I won't tell you how they do that just yet - but when they decide it's time to do that, it's a lot easier, and their reproductive efficiency's higher if they're all living close together. So we want to understand how they do this: How do they stick? And I can't really tell you all the details, because we're still trying to figure it out, but let me give you a little flavor of some of the things that we're trying to do. This is a picture of one of the aquarium systems we have in our lab, and everything in the image is part of the system, and so what we do is we keep - and you can see in the glass tank there, at the bottom, a bunch of mussels. We have the water chilled, we have the lights cycled, we actually have turbulence in the system because the animals make more adhesives for us when the water is turbulent. So we induce them to make the adhesive, we collect it, we study it. They're here in Indiana; as far as they know, they're in Maine in February, and they seem to be pretty happy, as far as we can tell. And then we also work with oysters, and up top, it's a photo of a small reef in South Carolina, and what we're most interested in is how they attach to each other, how they connect. So what you can see in the bottom image is two oysters cementing to each other. We want to know what's in between, and so a lot of times, we'll cut them and look down, and in the next series of images we have here, you can see, on the bottom, we'll have two shells, the shell of one animal and the shell of another animal, and the cement's in between. If you look at the image on the right, what you can maybe see is that there's structure in the shell of each animal, but then, the cement actually looks different. And so we're using all sorts of fancy biology and chemistry tools to understand what's going on in there, and what we're finding is the structures are different and the chemistry is actually different, and it's quite interesting. And in this picture - I guess, let me step back before I tell you what this is. So do you know the cartoon "The Magic School Bus"? Or if you're a little bit older, "Fantastic Voyage," right? And you remember, they had characters that they would shrink down to these microscopic levels, and then they would sort of swirl in and swim around and fly around all these biological structures? I think of this as like that, except for it's real in this case. And so what we did is we have two oysters that are stuck together, and this area used to be completely filled in with the cement, and what we're finding is that the cement has lots of different components in there, but broadly speaking, there are hard, non-sticky parts and there are soft, sticky parts, and what we did is we removed the non-sticky parts selectively to see what's left - for what's actually attaching the animals - and what we got is this, and we can see there's a sticky adhesive that's holding them together. And I just think it's a really cool image because you can imagine yourself flying in and going back there. Anyways, those are some of the things we're doing to understand how marine biology is making these materials. And from a fundamental perspective, it's really exciting to learn. But what do we want to do with this information? Well, there's a lot of technological applications if we can harness what the animals are doing. So let me give you one example. So imagine you're at home and you break your favorite figurine or a mug or something like that. You want to put it back together. So where do you go? You go to my favorite place in town, which is the glue aisle of the hardware store. I know where you spend your nights because you're all hip, cool people, because you're here, and you're going to bars and concerts - this is where I hang out every night. So anyways, so what I want you to do is get one of every adhesive that's on the shelf, bring it home, but before you try to put things back together, I want you to try to do it in a bucket of water. It's won't work, right? We all know this. So obviously, marine biology has solved this, so what we need to do is figure out ways to be able to copy this ourselves. And one of the issues here is you can't just go and get the materials from the beach, because if you get some mussels and try to milk them for their adhesive, you'll get a little bit of material, but you're never going to have enough to do anything with, just enough to see. We need to scale this up, ideally maybe train-car scale. So on the top is an image of one of the types of molecules that the animals use to make their glue, and what they are is very long molecules called proteins, and these proteins happen to have some fairly unique parts in them that bring about the adhesive properties. What we want to do is take those little parts of that chemistry, and we want to put it into other long molecules that we can get, but that we can make on a really large scale, so you might know them as plastics or polymers, and so we're sort of simplifying what they do but then putting that adhesion chemistry into these large molecules. And we've developed many different adhesive systems in doing this. When you make a new adhesive that looks pretty good, what do you do? You start running around the lab, just sticking stuff together. In this case, we took a bit of a glue and glued together two pieces of metal. We hung something from it to see what it looked like, so we used a pot of live mussels, and we thought we were very clever. (Laughs) We're obviously much more quantitative about this most often, and so we benchmark against commercial adhesives, and we actually have some materials now that are stronger than superglue. So to me, that's really cool. That's a good day in the lab: it's stronger than superglue. And here's something else that we can do. So this is a tank of seawater, and then in that syringe is one of our adhesive formulations. What we're doing is we're dispensing it completely underwater on a piece of metal. And then we want to make an adhesive bond, or joint. So we take another piece of metal, and we put it on there and just position it. And you want to let it set up for a while, give it a chance, so we'll just put a weight on it, nothing fancy. This is a tube with lead shot in it, nothing fancy. And then you let it sit for a while. So this has never seen air; it's completely underwater. And you pick it up. I never know what's going to happen; I'm always very anxious here. You pick it up ... and it stuck. To me, this is really cool. So we can actually get very strong underwater adhesion. Possibly, it's the strongest or one of the strongest underwater adhesives that's ever been seen. It's even stronger than the materials that the animals produce, so for us, it's pretty exciting, it's pretty cool. So what do we want to do with these things? Well, here are some products that you're probably really familiar with. So think about your cell phone, your laptop, plywood in most structures, the interior of your car, shoes, phone books - things like this. They're all held together with adhesives, and there's two main problems with the adhesives used in these materials. The first one is that they're toxic. So the worst offender here is plywood. Plywood or a lot of furniture or wood laminate in floors - a main component of the adhesives here is formaldehyde, and it's maybe a compound you've heard of. It's a gas, and it's also a carcinogen, and so we're constructing a lot of structures from these adhesives, and we're also breathing a lot of this carcinogen. So not good, obviously, right? The other issue is that these adhesives are all permanent. And so what do you do with your shoes or your car or even your laptop at the end of life, when you're done using it? For the most part, they end up in landfills. There's precious materials in there we'd love to be able to get out and recycle them, but we can't do it so easily, because they're all stuck together permanently, right? So here's one approach we're taking to try and solve some of these problems, and what we've done here is we've taken another long molecule that we can actually get from corn, and then into that molecule, we've put some of the adhesion chemistry from the mussels. So because we've got the corn and we've got the mussels, we call this our surf-and-turf polymer. And it sticks. It sticks really well. It's very strong. It's also bio-based. That's nice. But maybe more importantly, here, it's also degradable; we can degrade it under very mild conditions, just with water. And so what we can do is we can set things up and we can bond them strongly when we want, but we can also take them apart when we want. It's something we're thinking about. And here is a place where a lot of us want to be. Actually, in this specific case, this is a place we do not want to be, but we'd like to replace this. So sutures, staples, screws: this is how we put you back together if you've had some surgery or an injury. It's just awful. It hurts. In the case of the sutures, look at how much you're making concentrated, mechanical stresses as you pull things together; you're making sites for infection; poke holes in healthy tissue - it's not so good. Or if you need a plate to hold together your bones, look at how much healthy bone you have to drill out just to hold the plate in place - so this is awful. To me, it looks like these were devised in a medieval torture chamber, but it's our modern surgical joinery. So I'd love it if we'd get to a place where we can replace systems like this with adhesives, right? It's not easy.
Me gustaría que me acompañaran en un viaje, y quiero ir a la playa y llevarles a todos Uds. a la playa y así disfrutar del aire del mar y del rocío de la sal. Bajemos al borde del agua, y notarán que las olas nos golpean, y que es muy dificil mantenerse en el lugar, ¿verdad? Pero ahora, miren hacia abajo, y lo que van a ver es que las rocas están cubiertas de todo tipo de criaturas marinas que se mantienen en ese lugar, sin problema. Y resulta que si quieren sobrevivir en este ambiente realmente exigente, su misma existencia depende de su capacidad para hacer pegamento. Así que déjenme presentarles a algunos de los héroes de nuestra historia, sólo a algunos de ellos. Estos son mejillones, y se darán cuenta de que están cubriendo las rocas, y lo que han hecho es hacer adhesivos, y están pegados a las rocas, y en realidad están pegandos unos a otros. Así que están apiñados juntos como un grupo. Este es un primer plano de un arrecife de ostras, y las ostras, son increíbles. Lo que hacen es cimentarse unas a otras, y construir estos enormes, extensos sistemas de arrecifes. Pueden tener kilómetros de largo, y metros de profundidad, y probablemente, son la influencia mas dominante en la salud de un ecosistema marino costero porque lo que hacen es filtrar el agua constantemente, y retienen la arena y la tierra en su lugar. En realidad, otras especies viven dentro de estos arrecifes. Y luego, si piensan en lo que pasa cuando viene una tormenta, si la marejada tiene que golpear primero millas de estos arrecifes, la costa detrás de ella va a estar protegida. Así que son realmente muy influyentes. Si han estado en alguna playa rocosa casi en cualquier parte del mundo, estarán familiarizados con los percebes. Lo que hacen estos animales - y hay muchos otros, estos son solo tres de ellos - es que crean adhesivos, se adhieren entre sí y a las rocas y construyen comunidades, y haciendo esto, logran muchas ventajas de supervivencia. Una de ellas es que cada individuo está sometido a menos turbulencia y a todas las situaciones dañinas que pueden pasar en ese ambiente. Así que están todos allí acurrucados. También hay una seguridad en ser numerosos porque también les ayuda a mantener alejados a los depredadores, porque si, digamos, una gaviota quiere cogerlos y comerlos, es más dificil para la gaviota si están pegados juntos. Y luego otra cosa en la que también ayuda es en la eficiencia reproductiva. Así que pueden imaginar que cuando el Sr. y la Sra. Percebe deciden, "Vale, es hora de tener percebes bebé", aún no les diré cómo lo hacen, pero cuando deciden que es hora de hacerlo, es mucho más fácil, y su eficiencia reproductiva es mayor si están viviendo todos juntos. Así que queremos entender cómo hacen esto: ¿Cómo se pegan? Y no puedo decirles todos los detalles, porque todavía estamos intentando averiguarlo, Pero déjenme mostrarles algunas de las cosas que estamos intentando. Esta es una foto de uno de los acuarios que tenemos en nuestro laboratorio, y todo lo que hay en la imagen es parte del sistema, y así lo que hacemos es mantener - y pueden ver en el tanque de vidrio del fondo, un puñado de mejillones. Enfriamos el agua, alternamos las luces, provocamos turbulencias en el sistema porque los animales hacen más adhesivo cuando el agua es turbulenta. Así que los inducimos a hacer el adhesivo, lo recogemos, lo estudiamos. Están aquí en Indiana; pero por lo que a ellos respecta, están en Maine en febrero, y parecen estar muy felices, por lo que podemos decir. Y también trabajamos con ostras, y lo de arriba es la foto de un pequeño arrecife en Carolina del Sur, y lo que más nos interesa es cómo se unen unas a otras, como se conectan. Y lo que ven en la imagen inferior son dos ostras cementándose entre sí. Y queremos saber qué hay en medio, así que muchas veces, las cortamos y miramos, y en las siguientes series de imagenes que tenemos aquí pueden ver, en la parte inferior, que tenemos dos conchas, la concha de un animal y la concha de otro animal, y el cemento está en medio. Y si miran la imagen de la derecha, lo que tal vez puedan ver es que en la concha de cada animal hay estructura, pero el cemento en realidad se ve diferente. Así que usamos todo tipo de herramientas de biología y química para entender lo que está pasando ahí, y lo que encontramos es que las estructuras son diferentes y la química es realmente diferente, y es bastante interesante. Y en esta foto - déjenme retroceder antes de que les diga qué es esto. ¿Conocen los dibujos "El autobús mágico"? O si son un poco más mayores, "Viaje alucinante", ¿verdad? ¿Y recuerdan, que tenían personajes que se reducían a niveles microscópicos, y luego en cierto modo se arremolinaban y nadaban y volaban alrededor de todas estas estructuras biológicas? Pienso en esto como eso, aunque en este caso es real. Así que tenemos dos ostras que están pegadas, y esta área solía estar completamente rellenada con el cemento, y lo que encontramos es que ese cemento tiene muchos componentes diferentes, pero en términos generales, hay partes duras, no pegajosas y hay partes blandas y pegajosas, y lo que hicimos fue eliminar las partes no pegajosas selectivamente para ver qué quedaba - qué estaba en realidad uniendo a los animales - y obtuvimos esto, y podemos ver que hay un adhesivo pegajoso que los mantiene juntos. Y creo que es una imagen realmente genial porque se pueden imaginar volando y llegando allí. Esas son algunas de las cosas que hacemos para entender cómo la biología marina crea estos materiales. Y desde una perspectiva básica, es realmente emocionante de saber. Pero, ¿qué queremos hacer con esta información? Bueno, hay muchas aplicaciones tecnológicas si podemos aprovechar lo que hacen los animales. Déjenme darles un ejemplo. Imaginen que están en casa y rompen su figura favorita o una taza o algo así. Quieren volver a unir las piezas. Así que ¿a dónde van? Van a mi lugar favorito en la ciudad, que es el pasillo de pegamento de la ferretería. Sé donde pasan sus noches porque Uds. son modernos, son geniales, porque están aquí, y van a bares y conciertos - aquí es por donde yo salgo cada noche. De todas maneras, lo que quiero que hagan es coger uno de cada adhesivo que están en el estante, llevarlo a casa, pero antes de intentar juntarlo todo de nuevo, quiero que intenten hacerlo en un cubo de agua. No va a funcionar, ¿verdad? Todos lo sabemos. Obviamente, la biología marina ha resuelto esto, así que tenemos que encontrar maneras para poder copiar esto. Y uno de los problemas aquí es que no pueden ir a buscar los materiales a la playa, porque si cogen unos mejillones y tratan de extraerles su adhesivo, obtendrán un poco de material, pero nunca lo suficiente para hacer algo, solo lo suficiente para ver. Necesitamos ampliar esto, idealmente tal vez a la escala de un vagón de tren. Arriba hay una imagen de uno de los tipos de moléculas que los animales usan para hacer su pegamento, y son moléculas muy largas llamadas proteínas, y estas proteínas da la casualidad que tienen algunas partes bastante únicas que crean las propiedades adhesivas. Lo que queremos hacer es tomar esas pequeñas partes químicas, y ponerlas en otras moléculas largas que podamos obtener, pero que podamos hacer a una escala realmente grande, quizás los conozcan como plásticos o polímeros, y así estamos como simplificando lo que hacen pero poniendo esa química adhesiva en estas moléculas grandes. Y desarrollamos muchos sistemas adhesivos diferentes para hacer esto. Cuando hacen un nuevo adhesivo que se ve bastante bien, ¿qué hacen? Empiezan a pegar cosas por todo el laboratorio. En este caso, cogimos un poco de pegamento y pegamos dos piezas de metal. Colgamos algo de eso para ver como se veía, usamos una olla de mejillones vivos, y nos creímos muy inteligentes. (Risas) Obviamente muy a menudo somos mucho más cuantitativos sobre esto, y nos comparamos con adhesivos comerciales, y en realidad ahora tenemos algunos materiales más fuertes que el superglue. Y para mí, eso es genial. Ese es un buen día en el laboratorio: es más fuerte que el superglue. Y hay algo más que podemos hacer. Este es un tanque con agua de mar, y en esa jeringilla está una de nuestras formulaciones adhesivas. Lo que estamos haciendo es dispersarlo completamente bajo el agua sobre una pieza de metal. Y queremos hacer una unión adhesiva, o una junta. Así que cogemos otra pieza de metal, y la ponemos allí y solo la posicionamos. Y queremos dejar que se asiente por un tiempo, así que le ponemos un peso encima, nada sofisticado. Este es un tubo con inyección de plomo nada estrafalario. Y lo dejamos reposar por un rato. Esto nunca estuvo en el aire; está totalmente bajo el agua. Y lo recogemos. Nunca sé qué va a pasar; siempre estoy muy ansioso en esta parte. Lo recogemos ... y está pegado. Para mí esto es realmente genial. Así que en realidad podemos conseguir adherencia submarina muy fuerte. Posiblemente, sea el más o uno de los adhesivos subacuáticos más fuertes. que se haya visto nunca. Es aún más fuerte que los materiales que producen los animales, Así que para nosotros, es muy emocionante, es genial. Entonces, ¿qué queremos hacer con estas cosas? Aquí hay algunos productos con los que quizás estén muy familiarizados Piensen en su móvil, su portátil, el contrachapado de muchas estructuras, el interior de su auto, zapatos, guías telefónicas, cosas como esas. Todas ellas están unidas con adhesivos, y hay dos problemas principales con los adhesivos usados en estos materiales. El primero es que son tóxicos. Y el peor delincuente aquí es el contrachapado. En el contrachapado o muchos muebles o suelos laminados de madera - un componente principal de esos adhesivos es el formaldehído, y quizás es un compuesto del que oyeron hablar. Es un gas, y también es un carcinógeno, y estamos construyendo muchas estructuras con estos adhesivos, y también estamos respirando mucho de este carcinógeno. Y eso obviamente no es bueno, ¿verdad? El otro problema es que estos adhesivos son permanentes. ¿Y qué hacen con sus zapatos o su coche o incluso su portátil al final de su vida útil, cuando ya no los usan? La mayoría terminan en vertederos. Y tienen materiales preciosos que nos encantaría poder sacar y reciclar, pero no podemos hacerlo fácilmente, porque están pegados permanentemente, ¿verdad?. Así que estamos tomando un enfoque para resolver algunos de estos problemas, y lo que hemos hecho aquí es tomar otra molécula larga que podemos obtener de maíz, y luego en esa molécula, hemos puesto algo de adherencia química de los mejillones. Así que como tenemos el maíz y tenemos los mejillones, lo llamamos nuestro polímero de tierra-y-mar. Y se pega. Se pega muy bien. Es muy fuerte. Y también tiene base biológica. Eso es bueno. Pero quizás lo más importante, es que también es degradable; podemos degradarlo en condiciones muy suaves, tan solo con agua. Y lo que podemos hacer es configurar cosas y podemos unirlas fuertemente cuando queramos, pero también podemos desunirlas cuando queramos. Es algo en lo que estamos pensando. Y muchos de nosotros querríamos estar en un lugar así. En realidad, en este caso, este es un lugar donde no querríamos estar, sino que nos gustaría cambiarlo. Suturas, grapas, tornillos: Así es como les recomponemos si han tenido alguna operación o lesión. Es simplemente horrible. Duele. En el caso de las suturas, miren toda la tensión mecánica concentrada para juntarlas; dan lugar a infecciones; hacer agujeros en el tejido sano no es bueno. O si necesitan una placa para unir sus huesos, miren cuánto hueso sano tienen que perforar sólo para fijar la placa, esto es horrible. Para mí es como si fueran ideados en una cámara de tortura medieval, Pero es nuestra cirugía moderna. Así que me encantaría poder llegar a reemplazar sistemas como este con adhesivos. No es fácil. Estamos trabajando en esto, pero no es fácil.
We're working on this, but this is not easy. So think about what you would need for adhesives in these cases. So first of all, you would need an adhesive that will set in a wet environment. And if you look at the silly little picture there, it's just to illustrate that our bodies are about 60 percent water, so it's a wet environment. It's also to illustrate that this is why I am a scientist and not an artist. I did not miss my calling at all. So then, the other requirements you need for a good biomedical adhesive: it needs to bond strongly, of course, and it needs to not be toxic. You don't want to hurt the patients. And getting any two of those requirements in a material is pretty easy. It's been done many times. But getting all three hasn't been done; it's very hard. And then if you talk to surgeons, they get really picky: "Oh, actually I want the adhesive to set on the same time frame as the surgery." Oh, okay. Or, "Oh, I want the adhesive to degrade so the patient's tissues can remodel the site." So this is really hard. We're working on it. This is just one image we have. So we're getting all sorts of bones and skin and soft tissue and hard tissue, and sometimes we'll whack it with a hammer. Usually, we're cutting it in very precise shapes; then we glue them back together. We've got some exciting results, some strong materials, some things that look like they're not toxic. They set wet, looks pretty good, but I won't tell you we've solved the wet-adhesion problem, because we haven't, but it's certainly in our sights for the future. So that's one place that we'd like to see things go farther down the road. There's lots of other places, too, you can imagine, we might be better off if we could get more adhesives in there. So one thing is cosmetics. So if you think about people putting on fake nails or eyelash extensions here - like this - what do they use? They use very toxic adhesives right now. So it's just ripe for replacement. That's something we'd like to do. And there are other places too. So think about cars and planes. The lighter you can make them, the more fuel efficient they're going to be. And so if we can get away from rivets and from welding to put more adhesives in there, then we might be better off with our future generation of transportation. So for us, this all comes back to the beach. So we look around and we wonder, "How do these sea creatures stick? And what can we do with the technology?" And I would argue that we have really a lot of things we can still learn from biology and from nature. So what I'd like to encourage you all to do in the future is put down your nonrecyclable laptops and cell phones and go out and explore the natural world and then start asking some of your own questions. Thanks very much. (Applause)
Piensen en qué adhesivos necesitarían para estos casos. En primer lugar, necesitarían un adhesivo que funcione en un ambiente húmedo. Y si miran la pequeña y un poco tonta imagen ahí, es sólo para ilustrar que nuestros cuerpos son alrededor del 60 % agua, que es un ambiente húmedo. Y también es para ilustrar porqué soy un científico y no un artista. No me perdí mi vocación en absoluto. Los otros requisitos que necesitan para un buen adhesivo biomédico: es que una fuertemente, por supuesto, y que no sea tóxico. No queremos dañar a los pacientes. Y conseguir cualquiera de esos requisitos en un material es bastante fácil. Se ha hecho muchas veces. Pero conseguir los tres no se ha hecho, es muy duro. Y si hablan con los cirujanos, se ponen muy quisqillosos: "Quiero que el adhesivo se fije en el mismo período que la cirugía". Oh, vale. O "Quiero que el adhesivo se degrade para que los tejidos del paciente remodelen el sitio". Así que esto es muy difícil. Estamos trabajando en ello. Esta es solo una imagen que tenemos. Así que conseguimos todo tipo de huesos y piel y tejidos blandos y duros, y a veces los golpeamos con un martillo. Normalmente, los cortamos en forma muy precisa; y luego los pegamos de nuevo. Hubo algunos resultados emocionantes, y materiales fuertes, algunas cosas que parecen no ser tóxicas. Se unen mojadas, y se ven bien, no diré que resolvimos el problema de la adherencia en húmedo, porque no lo hicimos, pero está ciertamente en nuestra mira para el futuro. Nos gustaría que las cosas llegaran más lejos a partir de ahí. Como imaginarán, hay muchos otros lugares que podríamos mejorar si pudiéramos tener más adhesivos. Uno de ellos es la cosmética. Si piensan en la gente que usa uñas o pestañas postizas, algo así. ¿Qué utilizan? Ahora mismo usan adhesivos muy tóxicos. Es el momento propicio para el cambio. Es algo que nos gustaría hacer. Y hay otros lugares también. Piensen en los coches y los aviones. Cuanto más ligeros se hagan, más eficiente será el consumo del combustible. Y si podemos librarnos de remaches y soldaduras y poner más adhesivos, entonces mejoraríamos nuestra futura generación de transportes. Así que para nosotros, todo esto nos lleva de vuelta a la playa. Miramos alrededor y nos preguntamos, "¿Cómo se adhieren estas criaturas marinas y qué podemos hacer con la tecnología?" Y yo diría que todavía hay mucho por aprender de la biología y la naturaleza. Así que me gustaría animarles a que en el futuro dejaran sus no reciclables portátiles y móviles y salieran a explorar el mundo natural y empezaran a hacerse sus propias preguntas. Muchas gracias. (Aplausos)